1
6
Press the release button and hold down (1.).
Press the rear On/Off switch (2.).The saw chain runs.
Switching off
Release the On/Off switch.
Battery state of charge
Press the button on the battery to check the state of charge at the state of charge indicator
LED.
The indicator goes out after 5 seconds.
If one of the LED flashes, the battery must be recharged. If none of the LED light up after the
button is pressed, the battery is faulty and must be replaced.
Using the device
WARNING!
Before using the power tool, familiarise yourself thoroughly with the sawing
technique of chain saws (see section “
Basic working technique
”). Risk of
injury!
Never allow children to operate the chain saw. Allow no person to use this chain
saw who has not read this user manual or received adequate instructions for the
safe and proper use of this chain saw.
We recommend attending suitable training courses. The information listed here is only
additional!