Page 8
BYPASSING –
INDIVIDUAL ZONES
This is used to temporarily exclude one or more zones that would normally be protected. For
instance, a pet may need to be left in a part of the house that is usually protected.
If you wish to bypass one or more zones, this must be done while the system is in the
disarmed state. The following steps are used for bypassing zones. Once you have Bypassed
the zone(s) you may Arm the system via the
ON
or
PARTIAL
Mode. When your security
system is disarmed, any zones which have been temporarily isolated or bypassed will be
reset, and will therefore be protected when the system is armed again.
To manually un-
bypass zones, perform the bypassing procedure on a zone that is already bypassed.
The corresponding light for that zone will go off when un-bypassed.
Key Sequence
Operation
This example shows a user
bypassing zones 4 and 5.
1.
Press the
[BYPASS]
key.
2.
(OPTIONAL) Enter a user code.
(The bypass light flashes.)
3.
Enter a 2-digit zone indicating the
zone you wish to bypass. (Example:
Press the [0]-[4] key for zone 4,
press [0]-[5] for zone 5.) The
corresponding light for that zone will
turn on when bypassed.
4.
Press the
[BYPASS]
key again.
