FutureLogic PSA-66-ST2NU, Руководство оператора

Страница: 7 / 29

Operators and Technicians Manual
© 2006 – 2007 FutureLogic, Incorporated. All Rights Reserved. MNL Page 3 of 29 12/06/2007
MNL-000030 REV.X07
Keypad Status Light
The keypad LEDs report the status of the printer whenever power is present. Table 2-1 lists each
condition of the keypad LEDs.
Table 2-1 Keypad LEDs Status Reporting Printer Condition
Condition Ready Paper Open Fault
Unit is Powered Off
Unit Ready blink
Unit Flushed
Paper Out
Head Up or Ticket Module Open
Temperature Error
Voltage Error
Print Head Error
Missing Black Index Mark
Paper is Jammed blink
Indicates the LED is ON.
Bezel Operation
Use the front bezel display to determine the state of the printer while on the casino floor, at a
distance, without disturbing the game. Table 2-2 lists the conditions indicated on the bezel display.
Table 2-2 Bezel Display Status
Bezel Display Status
Solid On Printer Idle and Ready
Slow Blink Paper Low or Printer Error
Fast Blink Ticket Printing and/or Ticket in Chute
Off Printer power off
See Chapter 4 for information on the current ratings of the bezel ports.
Printer Sensor Functions
There are six primary sensor functions on the printer. These sensors work with the game firmware to
provide reliable trouble-free operation. Any error conditions resulting from these sensors are
indicated by the front bezel light and keypad LEDs. Table 2-3 describes each of these sensors.
Table 2-3 Sensors
Sensor Description
Paper Out The Paper Out sensor is located in the print head. It terminates the print operation when
the paper has run out and checks for proper form registration. The printer ceases printing
and feeding operations when it detects a Paper Out condition. Correct a Paper Out
condition by loading more paper into the unit.
Paper Low The Paper Low sensor is located in the paper well. It determines when the paper stack has
approximately 14 tickets remaining. A Paper Low condition automatically resets once a
stack with a greater height is loaded. Paper low sensing occurs when the system is idle
and takes a few seconds to detect the new paper level.
Paper Taken The Paper Taken sensor is located in the presentation chute of the printer. It determines
when the customer has actually taken their cashout ticket.
Drawer Open The Drawer Open sensor is located in the paper well. It detects when the printer is open.
Platen
Engaged The Platen Engaged sensor is located in the print head. It detects when the printer
platen is in use.
Printer Open The Printer Open sensor is located in the front of the unit. It detects when the printer
clamshell is open.