UM-STO-C Revision C
12
Operators and Technicians
Manual
PSA-66-001N
PSA-66-ST
Figure 2-2
Sample Configuration Ticket
2.9 Clearing a Paper Jam
The printer has been designed to operate reliably with a minimum of paper jamming. Should it be
necessary to clear a paper jam however, follow the simple instructions below. After the jam is cleared,
perform these operations in reverse.
When clearing a paper jam:
DO:
•
Insure that all paper paths from the entry point at the back of the paper well, through the printer and
cutter and the presentation chute are clear of paper or obstructions
•
Use the platen release lever located on the side of the unit
•
Use the rotary screw at the top of the printer
Model:
PSA-66-ST
Firmware:
2.4.0.0.0
COMMUNICATION
Interface:
serial
Baud Rate:
19200
Data Bits:
8
Parity:
NONE
Handshaking:
HARDWARE
PRINT CONTROL
Darkness Control: +00%
Black Bar Index:
Disabled
Print On Demand: Disabled
Auto Sleep Timer: Off
SYSTEM RESOURCES
FLASH -Used:
000000
-Free:
024064
LIBRARY INVENTORY
Templates:
Print Regions:
Graphics:
Fonts:
3(0), 7(0), 8(0), 5(0)
Model number and software version
System communications setup