UM-STO-C Revision C
10
Operators and Technicians
Manual
PSA-66-001N
PSA-66-ST
2.4 Bezel Operation
The front bezel display allows the operator to determine the state of the printer on the casino floor, at a
distance, without disturbing the game. The table below lists the various conditions which the bezel
indicates.
Table 2-1
Bezel Display Status
Bezel Display
Status
Solid On
Printer Idle and Ready
Slow Blink
Paper low or Printer Error
Fast Blink
Ticket Printing and/or Ticket in chute
Off
Printer power off
2.5 Keypad LED Operation and Printer Status Conditions
The keypad LEDs provide a more detailed reporting of system status. Table 2-2 below lists the status of
the keypad LEDs in a variety of status which are defined following.
Table 2-2
Keypad LEDs Status Reporting
CONDITION
STATUS_LED
ERR_LED
Unit in Powered Off
0FF
0FF
Unit Ready
ON
OFF
Unit Flushed
ON
ON
Paper out
OFF
ON
Head Up
OFF
ON
Temperature Error
OFF
MED BLINK
Voltage Error
OFF
SLOW BLINK
Print Head Error
ON
FAST BLINK
Missing Black Index Mark
ON
FAST BLINK
Paper Jam
ON
FAST BLINK
Although there are a variety of error conditions which can occur, most printer errors are a result of the
printer running out of paper or the operator raising the head up lever. This section lists the possible error
which can occur, and how the condition is remedied.
P
APER
O
UT
:
This condition results when the printer detects that paper is not present. The printer scans
for a paper out condition at all times. Remedy the condition by loading a new paper stack.
H
EAD
U
P
:
This condition results from lowering the head release lever. To remedy the error, it is
necessary to raise the blue lever on the side of the unit.