Futurecom Siren & Lights Interface Module, Руководство по установке и настройке

Страница: 28 / 61

8A089X01 Rev 1
SLIM Installation Manual
3/23/2018 Page 28 of 61
to perform one function, and then changes when pressed again to perform another
function. Put another way, it cycles. Multi-state buttons have various number of states, in
the Module configuration the number of states is shown in parenthesis. Off is counted as
a state.
The
Display Text column is an optional drop-down box that defines the text shown (if any)
on the radio control head to indicate to the user that a function is active. The display text
should match the type of feature enabled. For example, if an input is set to enable siren
button 4, and siren button 4 happens to enable a siren relay, and the relay happens to be
connected to an external vehicle Lightbar then the display text should probably be set to
“Lightbar On” to alert the user that lights are currently activated.
Figure 2-28 Display Text Column
NOTE:
Inputs should not be mapped to other Inputs . Doing so can lead to operating and
configuration issues. If needed, multiple Inputs can be mapped to the same output Action .
2.5.1.2.5 Action Consolidation
Action consolidation is when one input triggers multiple outputs or actions. Users familiar
with the radio may already be aware that the radio supports action consolidation on some
control head and mic buttons. Those buttons are indicated in the utility by green button
labels. Buttons which are shown as half green & half white can be set as action
consolidation buttons in the radio but can also be used as traditional buttons.
Separately from the radio, the Module also supports action consolidation for O9 slide
switch positions. The additional actions are limited to GPIO outputs and show up in the
configuration table as multiple rows with the same deice and input. The additional rows
for GPIO outputs can be set to activate (on), deactivate (off), or to not affect (no change)
the individual GPIO outputs in addition to any siren button functions enabled. By default,
the outputs will not be changed.