www.futurelight.com
22
7
INSTALLATION
The accessory truss bar is required for suspending the displays. A single truss bar is used to suspend a
single vertical row of up to 10 displays. Truss bars can be interconnected to a horizontal row using U profiles.
The truss bar or chain of truss bars can be mounted to a truss installation using commercially available tools.
You can find suitable items in the Accessories section.
•
Use professional trussing systems only. The device must never be fixed swinging freely in the room. The
installation area for the display has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation. In case of wind speeds greater than 18 m/sec, the displays
must be removed from the trussing and disassembled.
•
Danger of fire! Make sure there are no highly flammable materials within a distance of 0.5 m.
•
The device has to be installed out of the reach of people and should be installed outside areas where
persons may walk by or be seated.
•
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other dangerous areas is forbidden.
•
Hanging devices may cause severe injuries when crashing down! If you have doubts concerning the safety
of a possible installation, do NOT install the device!
•
Overhead rigging requires extensive experience, including (but not limited to) calculating working load
limits, installation material being used, and periodic safety inspection of all installation material and the
device. If you lack these qualifications, do not attempt the installation yourself, but instead use a
professional structural rigger. Improper installation can result in bodily injury and or damage to property.
•
The installation must always be secured with appropriate secondary safety elements (e.g. steel rope) so
that no part of the installation can fall down if the main attachment fails. You must only use safety bonds
complying with DIN 56927, quick links complying with DIN 56927, shackles complying with DIN EN 1677-1
and BGV C1 carbines. The safety bonds, quick links, shackles and the carbines must be sufficiently
dimensioned and used correctly in accordance with the latest industrial safety regulations (e. g. BGV C1,
BGI 810-3). The maximum drop distance must never exceed 20 cm. A safety bond which already held the
strain of a crash or which is defective must not be used again.
•
The operator has to make sure that safety-relating and machine-technical installations are approved
- by an expert before taking into operation for the first time and after changes before taking into operation
another time.
- by an expert after every four year in the course of an acceptance test.
- by a skilled person once a year.
•
For installation in public or industrial areas, a series of safety instructions have to be followed that this
manual can only give in part. The operator must therefore inform himself on the current safety instructions
and consider them. The manufacturer cannot be made liable for damages caused by incorrect installations
or insufficient safety precautions!
DANGER TO LIFE!
Please consider the EN 60598-2-17 and the respective national standards during the
installation! The installation must only be carried out by an authorized dealer! Before taking
into operation for the first time, the installation has to be approved by an expert!
DANGER TO LIFE!
Suspension admissible with wind speeds up to 18 m/sec. In case of wind speeds greater than
18 m/sec, the displays must be removed from the trussing and disassembled.
DANGER TO LIFE!
The displays must always be suspendend with the truss bar. The maximum height is 10
displays high. Floor mounting is not possible.
DANGER TO LIFE!
Suspended installation by experienced and trained persons only. Incorrect installations are a
potential danger, especially if systems are flown above persons.
Содержание PVS-7.62
Страница 1: ......
