Future light PLB-130 Pro-Head-Beam, Руководство пользователя

Страница: 46 / 52

00077901.DOC, Version 1.0 46/52
Lamp on by power on
With this function you can select if the lamp will be switched on when switching the power on. Select
“ON”
by pressing Up or Down if you wish to enable this function or
“OFF”
if you don’t.
Lamp on/off via external controller
With this function you can select if you can switch the lamp on or off via an external controller. Select
“ON”
by pressing Up or Down if you wish to enable this function or
“OFF”
if you don’t.
Max Temperature
With this function you can set the inside temperature at which the projector will automatically switch the lamp
off. Press Up or Down to select the maximum inside temperature between 80 °C and 139 °C. Inside
temperatures below 90 °C are not critical. 90 °C and more should lead to the lamp being switched off. Please
note that the outside temperature should not exceed 45 °C.
Information
Time information
Current
With this function, you can display the temporary running time of the device from the last power on. The
display shows “XXXX”, “X“ stands for the number of hours. The counter is reset after turning the device off.
Lamp information
With this function, you can display the applied voltage, current and power of the high-intensity discharge
lamp.
Fixture Life
With this function, you can display the running time of the device. The display shows “XXXX”, “X“ stands for
the number of hours.
Temperature
Near lamp Temp
With this function you can display the temperature in the projector-head (near CMY-filter) in degree
Celsius/degree Fahrenheit.
...
Fan speed
With this function you can display the current fan speed. The display shows “XXXX”, “X“ stands for Hz.
Initial status
With this function, you can display with which value the respective channels will start.
Error channels
With this function, you can display the channel errors.
Fixture Model
With this function, you can display the model number and brand of the fixture.
Software version
With this function you can display the software version of each IC.
• Select
“Software ver.”
by pressing Up or Down.
• Press the Enter-button, the display shows e.g.
“1U01 VX.X.XX”
, “X.X.XX“ stands for the version number.
Set
Reset
With this function you can reset the device via the Control Board. You can select the different Reset-
functions by pressing Up or Down.
Movement
PAN Reverse
With this function you can reverse the PAN-movement.