00085201, Version 1.0
35/58
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
LED Beam with 150 W COB LED and the advantages of a Moving-Head
• With glass lens
• Extremely high light output
• Very narrow illumination angle of 3°
• Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
• Flicker-free projection
• Supports RDM (Remote Device Management)
• 11, 13, 14 or 17 DMX channels selectable
• Effect wheel with rotating 6 fold linear prism, 8-facet prism and frost
• Color wheel with 14 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Gobo wheel with 17 static gobos plus open
• With gobo shake function
• Exact positioning via 16 bit PAN/TILT movement resolution
• Dimmer
• Motorized focus
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• PAN angle switchable between 540° and 630°
• Sound-controlled via built-in microphone
• Switch-mode power supply for operation between 100 and 240 Volts
• ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts
etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
• Control board with graphic LCD display and foil-keyboard for adjusting the DMX-starting address,
PAN/TILT reverse, reset
• DMX-controlled operation or stand-alone operation with Master/Slave function
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Number of scenes can be changed individually
• Software upload by optional accessories via DMX link
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power up to 8 devices
• DMX control via any standard DMX controller
