
00139636, Version 1.0
46/56
Password
XXX
Password „050“
Private Reload
FACTORY RELOAD
3
ON/OFF
Program
Play
1
DMX receive
Back to DMX mode
Slave receive
Slave 1, Slave 2,
Slave 3
Slave setting
Sequence
Master/Alone
Auto program
Music
Master/Alone
Music control
Select Chase
2
Chase Part 1
Chase Part 2
Chase Part 3
Chase 1- 8 Chase 1
Chase 1- 8 Chase 2
Chase 1- 8 Chase 3
Select programs to
be run
Edit Chase
2
Chase 1
:
Chase 8
Chase Test
Step 01 = SCXXX
Step 64 = SCXXX
Testing program
Program in loop
Save and exit
Edit Scenes
2
Edit scene 001
:
Edit scene 250
Pan,Tilt, ...
-- Fade Time --
-- Scene Time --
DMX Input
Save and
automatically return
manual scenes edit
Scenes Record
ScXX=>ScXX
Automat. scenes rec
Connect
Address
DMX start address setting
With this function, you can adjust the desired DMX start address via the Control Board.
• Select
“Address“
by pressing Up or Down.
• Press the Enter-button, adjust the DMX address by pressing Up or Down.
• Press the Enter-button to confirm.
DMX Mode
DMX channel mode
With this function, you can select the DMX channel mode.
Set
Fixture Settings
Action if no DMX
With this function, you can “Hold” the DMX value or the device is switched dark “Blackout” if there is no
DMX-signal.
• Select
" Hold” or “Blackout”
by pressing Up or Down.
• Press Up or Down to select between "Hold" or "Blackout".
• Press the Enter-button to confirm.
Select temperature designation
With this function you can select the temperature designation.
• Select
“Temperature Unit”
by pressing Up or Down.
• Press Up or Down to select the desired degree between “Celsius” and “Fahrenheit”.
• Press the Enter-button to confirm.
Hibernation - power standby mode
With this function you can put the device in the power standby mode. This function will be automatically
activated after a predefined period of time of no DMX activity. In standby mode the lamp/LEDs and all motors
will power down if no DMX signal is sent to the fixture for a period of e. g. 15 minutes (can be user defined).
The fixture will automatically reset and return to normal operation once a DMX signal is sent.