CONSUMER INFORMATION
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA On the bottom of this
equipment is a label that contains, among other information, a
product identifier of US:
If requested, this number must be provided to the telephone
company.
The applicable jacks (i.e. RJ11C) for this equipment are
provided in the packaging with each piece of approved
equipment. The jacks are certified by Universal Service Order
Codes (USOC).
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug are provided with
this product. They are designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
The REN is used to determine the number of devices that may
be connected to a telephone line. Excessive RENs on a telephone
line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs,
contact the local telephone company. [For products approved
after July 23, 2001, the REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.]
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, disconnect it from
the network until the problem has been corrected or until you are
sure that the equipment is not malfunctioning.
Please follow instructions for repairing if any (e.g. battery
replacement section); otherwise do not alter or repair any parts
of device except specified.
Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
This equipment is hearing aid compatible.
