[UP] Key and [DOWN] Key
Press [UP] and [DOWN] key to view the CID numbers in
sequence. The display contents on screen include CID
number, incoming call time, the serial No. of CID entry. If
there is no any CID entry, LCD will show “NO CODE”.
[OUT] Key
Press [OUT] key at on-hook state to browse the outgoing
call entries including the outgoing call number, the
outgoing call time length, the serial No. of outgoing call
entry.
[DEL/FLASH] Key
At on-hook state, when a CID call or outgoing call entry is
found and needs to be deleted, press [DEL/FLASH] key
once to delete it.
At off-hook state, pressing [DEL/FLASH] key is just the
same to tap the hookswitch once.
[VOL+] Key and [VOL-] Key
At the communication state, press these two keys to adjust
the handset or speakerphone volume among 4 steps.
[911] Key
Whether at on-hook state or off-hook state, the phone can
enter the speakerphone state to make a call by pressing [911]
key. If you want to talk privately, you can lift the handset
for conversation. After the conversation is finished, the
phone will automatically hang up according to the hang-up
busy tone from other party.
Changing the Number of 911:
At on-hook state, input the number from [SET]
key + [911] key
Set M (Memory) Key
1) Set or Change M Key:
At on-hook state, press the private number + press #
