Futura MCR3, Руководство оператора

Страница: 21 / 26

19
Operation - Secondary Functions
While the unit is on, pressing and holding the power switch and then pressing
the touch panel switches will activate secondary or "shift" functions which are
indicated by the symbols above the switch.
Laser Out-of-Level: This function is for use with lasers that have
the ability to indicate that they are out-of-level by changing the RPM
of the laser. Two speeds of 140 RPM and 300 RPM are available
as well as out-of-level turned off. Press and hold the power switch
and then press the plumb switch to cycle through the options of 140 RPM, 300
RPM, and off. The LCD will indicate which is selected. "No display" on the LCD
indicates out-of-level is disabled. When the laser RPM drops to the selected
laser out-of-level speed, an "X" symbol will appear on the LED grade display
and on the LCD symbol.
Beam Averaging:
Press and hold the power switch and then press
the on-grade location switch to select and cycle the laser beam
averaging function. Selection "Off" - no display - chooses adap-
tive averaging. In this mode the receiver applies the highest level of averaging
appropriate for the laser rotation speed. A selection of one means every beam
strike is processed. Selecting two or four creates a rolling average of every two
or four beam strikes. This stabilizes the LED display in unstable laser set-ups
such as windy conditions or over long distances.
140 RPM
Selected
Laser below
140 RPM
Indicator
300 RPM
Selected
Laser below
300 RPM
Indicator
Averaging 2
Selected
Averaging 4
Selected
No Averaging
Selected