Maintenance:
Attention!
Careful and regular maintenance of Infrared Heater is required to
attain a long and efficient operation of your appliance.
1. Check the cleanliness of the Reflector and IR-Filament at least once
a month. If necessary, apply cleaning and maintenance instructions.
2. The number of checks may be increased considering the amount of
the dust in the environment.
3. Check the deformation of the Reflector, Wire and Frame visually
while cleaning the appliance. In case of any deformation, consult a
qualified technician.
4. Check the power cable and plug visually while cleaning the
appliance. In case of any deformation, consult a qualified technician.
5. It is recommended to change the reflector every 2 years for more
efficient operation.
Cleaning
Attention!
Regular and careful cleaning helps your heater operate for longer
years and more efficiently.
1. Unplug your power cable for your safety before cleaning your
appliance.
2. Take out the front grid wire through the inlets on the frame using a
slotted screwdriver.
3. Make sure that the power is off for your safety. Power cable plug
must be unplugged.
4. The reflector and filament must be cleaned with a soft cloth, a
smooth brush or cool or dry air. The cloth may be damp but never too
wet and the cleaner should not include any chemical.
5. Refrain from using cleaning material likely to damage the reflector
(cleanser etc.).
6. Insert the wire grid using a slotted screwdriver.
Disposal
Household Appliances, accessories and packaging should be
sorted for environmentally-friendly recycling.
Only for EC countries:
Do not dispose of appliances into household waste!
According to the European Directive 2002/96/EC on waste electrical
and electronic equipment and its incorporation into national right,
products that are no longer suitable for use must be separately
