to avoid a hazard.
2. Only operate the heater when it is correctly installed.
Our Electric Heater is equipped with a remote control.
3. To operate the heater, please turn on the Power
Switch firstly which is right side of heater. Then using
the remote control select desired heat setting 800W,
1600W or 2500W. Press the red power button on the
remote to turn the heater off.
Remote Control
1. Power indicator
When in use, press any button, the red
indicator will flash.
2. On / Off
Switches on or off the heater or stands it by.
3. First gear
After turn on the heater, you can choose low
heating.
4. Second gear
After turn on the heater, you can choose
moderate heating.
5. Third gear
After turn on the heater, you can choose high
heating.
Maintenance:
Turn off the circuit breaker before maintenance and let the unit cool completely.
1. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry with a soft cloth.
2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
3. Although this heater is outdoor approved (Balconies and patios), DO NOT immerse
the heater in water for your safety. Wait until the unit is completely dry before use.
Storage
If the heater will not be used for a long period of time, store it in a cool, dry location
when not in use. To prevent dust and dirt build-up, use the original packaging to repack
the unit.
Disposal
Fig. 5
Fig. 6
