2. The minimum distance of your appliance from the ceiling is 0.2 m (2.5 feet).
3. The minimum distance of your appliance from the animals is 1 m (3.5 feet).
4. The minimum distance of heating area of your appliance from the materials such as
wood, carton, cloth etc., is1m (3.5 feet).
5. WARNING: In order to avoid overheating, do not cover the appliance.
6. Do not insert any objects into the protective grid.
7. This appliance cannot be used by children under18 years of age and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Attention!
Only authorised and qualified persons can repair and replace parts of this
heater.
Using your Units
Installation of the Heater
1.
Attention before installation
1. Products should be put down gently
2. Acid and alkali environment installation is not recommended.
3. The product must be grounding
4. The products are required to check the product brand mark on the voltage and the
local voltage whether conform.
5. Ensure the power rating should have sufficient current carrying capacity.
2.
Ensure
the
production's
installation site
For the safe use of the product, the
product installation position should
guarantee the bottom minimum height
of 1.8 m from the ground, ceiling, roof,
or other coverings minimum distance
is 0.5 m, minimum distance with both
sides wall is 0.5 m (as shown in figure
1)
3. Installation Steps:
1. According to where the product installation location is, use a power drill to make four
8 mm round holes.
2. Insert the six plastic wall anchors into the six holes.
3.
Fixed the bracket using six ST4*35 screws and make sure the
installation points are fixed
securely
4.
Before fixing the heater, make sure the rocker power switch on the right side and then fixed the
bracket to the heater using four M6*14 screws and butterfly nuts
Fig. 1 Min. Distance to the Ground
