Futtura EconoGrade EG1 Скачать руководство пользователя страница 21

Страница: 21 / 21

Latec Instruments Inc.

240 Thames Rd. West

Exeter, Ontario, N0M 1S3, Canada

519-235-4200

FAX 519-235-1559

www.latec.on.ca [email protected]

LATEC 2016

This EG Series system is warranted to the original purchaser to be free from defects in workmanship and

material. Latec Instruments will repair or replace any defective part which may malfunction under normal

and proper use within a period of

ONE YEAR

from the date of purchase without charge for parts and labour,

once delivered and shipped prepaid to Latec Instruments together with proof of date and place of purchase.

This warranty is not subject to misuse, abuse, assignment, or transfer. The exclusive remedy under any and

all warrants and guarantees, expressed or implied, is limited to repair and/or replacement as provided herein,

and Latec Instruments shall not be liable for damages from loss or delay of equipment uses, consequential, or

incidental damage.

Warranty

Содержание EconoGrade EG1






















Результаты поиска

Содержание EconoGrade EG1

Отзывы:

Похожие инструкции для EconoGrade EG1

Бренды по названию

Популярные бренды

Futtura EconoGrade EG1, Инструкция по эксплуатации

Результаты поиска

Содержание EconoGrade EG1

Отзывы:

Похожие инструкции для EconoGrade EG1

Бренды по названию

Популярные бренды