Futtura EconoGrade EG1, Инструкция по эксплуатации

Страница: 18 / 21

Error Screens: EG Series control system has built in diag-
nostics to keep your system running at its peak performance.
If a problem develops with the receiver connection, cable, or
the device itself, it will be displayed in the main screen and
scroll the led indicator to get the operators attention.
Page 17
Manual Manual
Receiver Bad
EG Series Remote Toggle Switch Assy - You can control your
EG control box from a remote location with our optional two switch
remote. One switch toggles the EG Series between automatic
and manual mode, the other raises and lowers the control cylinder.
The switch assembly attaches to any lever using the universal
U-bolt assembly, or can be mounted any where with some fabrica-
tion .
EG Series Installation:
EG Series Installation - Control Box: To install the control box
find an area in the cab which will allow for the control box to be
easily viewed and controlled, but also does not interfere with the
operator’s controls and line of sight. To mount the control box use
the supplied mount as a template and drill 4 holes in the appro-
priate place. Then screw the mount into position and attach the
control box to the mount. The control box can now be adjusted for
your optimum viewing pleasure.
Receiver - The receiver can be mounted with any 1 3/4” pipe or
using the optional adjustable mast as a stand alone or with the
optional shock mount bracket. It should be mounted so that the
receiver can receive a laser hit from 360˚. This means the receiver
should clear any cab, stack or any other obstacle on the machine.
Suction Cup Control Box Mount - If a suction cup mount is
required for installation, we offer a standard mount that will receive
the existing mounting ball on the control box. This mount will allow
you to stick the control box to any clean, smooth surface. The part
number for the suction cup mount is P#: 101654 (not shown).
EG Series Options:
Adjustable Mast