10
Futrex Connect Advanced Software
The Futrex Connect software provided with your FUTREX-6100 software allows you to
connect the FUTREX-6100 to a Windows PC via the USB port on the instrument to store clients,
view graphs with changes over time, see full two page color reports, and other features.
In addition to this manual, you will find three supplement “Instructions for Use”
documents included with your instrument:
1.
Futrex Connect Software Set-Up Guide
2.
FUTREX-6100 Futrex Connect Software Manual
3.
FUTREX-6100 Instructions for Host Mode
A digital copy of these Instructions for Use (as well as this document) are available on
the USB drive that was included with the instrument. Should you have questions during the set-
up of the Futrex Connect software do not hesitate to contact Futrex Tech, Inc.
Admin Functions on the Stand-Alone FUTREX-6100
There are a few back-end functions on the FUTREX-6100 that can be adjusted,
depending on the region the device is being used in, or the mode it is to be used in. These will be
used infrequently.
Function Mode Options
F1 - Selection of English or Metric units.
F2 - Not used.
F3 - Not used.
F4 - Not used.
F5 - Selection of Warning Signal that two minutes have passed without any key pressed.
F6 - Not used.
F7 – Selection of Host Mode or Stand Alone Mode (See IFU “Instructions for Host Mode).
F8 - Not Used.
Entering into the Function Mode
1.
Turn Power Switch ON.
2.
Press the SELECT PROGRAM Key.
3.
Press the F-MODE Key.
4.
The Letter "F_" will appear on the screen.
F1 – Selection of English or Metric Units
The subject's height and weight values can be printed in English (lbs/in), or (Kg/cm)
units. After entering the Function Modem and "F" is displayed, type "1". The display will either
show "English" or "Metric".If you desire to change, press the SELECT PROGRAM pushbutton.
Then press "CLEAR".
