13
VOLTAGE OUTPUT
Output Type Setup:
1. Menu
2. Output Config.
3. Voltage Config.
4. Select Bi-polar or Uni-polar
Turn on voltage output:
5. Back to exit to main menu
6. Interfaces
7. Voltage Output
8. Select Enable
9. Back to main menu
10. Back again to exit
CURRENT OUTPUT
Output Type Setup:
1. Menu
2. Output Config.
3. Current Value
4. Select current output range
5. Current Config.
6. Select Uni-direction or Bi-direction
Turn on current output:
7. Back to exit to main menu
8. Interfaces
9. Current Output
10. Select Enable
11. Back to exit to main menu
Analog Output Quick Setup
Bi-polar and Uni-polar for voltage
configurations will determine if the
output would be ±5VDC for both
directional outputs from the sensor, or
map both directional outputs to +5VDC
with the zero at 2.5VDC.
Analog Low is set to zero load readings
and Analog High is set to the full
capacity of the sensor profile.
Uni-direction or Bi-direction for current
will determine if the current output range
is for the positive output of the sensor, or
if the zero should be shifted to allow the
selected current output range to adjust
for both directions from the sensor.
A Tare function will affect the reading
on the IPM650 as well as the Analog
Output.
TIPS FOR ANALOG OUTPUT