Futek F9300, Руководство пользователя, Страница: 40 / 40

FUTEK F9300
36
5.4 Display messages
If the printer detects an internal fault or user error or if it expects you to do something, a
message will appear in the LCD display.
It also displays the status during an operation (e.g.
Initializing
). Below you will find a list of
messages with brief descriptions of each message.
5.4.1 Messages LCD Panel
LCD Messages Meaning
Eject error
The printer cannot eject the paper/advance it to
park position.
Hardware Alarm
Internal hardware error, contact your dealer or
service technician.
Head hot
The print head is too hot. The printer will reduce
its print speed.
Initializing
This message appears during the printer’s
initializing phase after switching on the printer.
Load error
The printer fails to load the paper.
Loading default
Factory defined parameters will be reloaded in all
available menus after switching on the printer.
Load paper from
The printer has detected paper end during
operation/printer was switched on with no paper
loaded.
Parity error
A parity error during data transmission is
indicated.
Park position
Printer was switched on with no paper loaded.
Press any key
The user is requested to press any key.
Selftest
After power-on, the printer executes a short
hardware self-test.
Tear Paper off
The user is requested to tear off paper which has
been advanced to the tear.
Switch Paper Lever
Choose correct paper path. Turn paper lever