Futek F9300, Руководство пользователя, Страница: 22 / 40

FUTEK F9300
18
4.1.2 Online mode
After switching on, the printer is automatically set to online mode.
Only in this mode can it receive data from the computer.
■
Online
key: Toggle between Online and Offline mode.
■
Tear
key (4): Activates the tear function when fanfold paper
is loaded.
If
Load
is displayed above this key, no paper is loaded
in the printer or the paper is in park position. In this case the
display switches between
Online
and
Park Position
. Press
the key to feed paper to the printing position.
■
Setup
key: Sets the printer to setup mode.
4.1.3 Offline mode
Only in this mode is it possible to perform step, line, or form feeds from the control panel,
however, data cannot be received.
■
Park
key (1)
If fanfold paper is loaded in the printer, it is fed to the
park position or the tear position. If a single sheet is
loaded, it is ejected.
■
©
key (2)
Each press: Paper is transported upwards step by step.
Holding: Continuous transport upwards.
■
ª
key (3)
Each press: Paper is transported downwards step by step.
Holding: Continuous transport downwards.
■ ª LF/FF (4)
Paper in the printer:
Each press: performs a line feed (LF).
Holding: performs a form feed (FF).
■
Load
key (4)
No paper in the printer: The press on this key loads the
paper to the first print position.
■
Setup
key: Sets the printer to setup mode.
■
Online
key: Sets the printer to online mode.