MANUAL
250.120RC – DISTY 120RC [EN]
V1.0 – 09.2022
4
§
Measuring modes
Note:
These two operations can be done in all modes below.
-
To undo the last measurement, press the Clear / OFF button [12].
-
To save the measured values/results, hold the Records / Save button [11] for 1 sec.
For all Pythagoras measurements the user must follow the instructions’ order strictly!
We recommend to mount the instrument on a tripod with tilting head to increase the
accuracy of your measurement.
1.
Distance measurement (single / continuous)
Single measurement
For a single measurement: press the Measure / ON button [3] and focus on the target.
Press the Measure / ON button [3] a second time for a single measurement.
The result is displayed in the Major display area [h]. The previous 3 measurements are
displaced above in the auxiliary displays [g
1
, g
2
, g
3
].
Continuous measurement (minimum/maximum)
Hold the Measure / On [3] and focus on the target point.
To know the minimum and maximum distance, slightly move the focus left / right / up / down.
During measuring the actual maximum distance is displayed in the auxiliary display area [g
2
],
the minimum actual distance is displayed in the auxiliary display area [g
1
]. The mayor display
area [h] shows the actual distance measured during continuous measuring.
Press the Measure / On button [3] again to end the continuous measuring.
You can read the maximum measured distance in the auxiliary display area [g
2
], the minimum
actual distance in the auxiliary display area [g1]. The mayor display area [h] shows the last
distance measured.
2.
Area Measurement
Press the Measuring modes button [7] that number of times needed until the Area
Measurement symbol appears on the measuring mode area [c] on the screen.
Measure the area in 2 steps:
Press the Measure / ON button [3]
to measure the first side
Length of side 1 appears on
auxiliary display area [g
3
]
