Futech 009.02.S, Инструкция по эксплуатации

Страница: 23 / 40

DECACROSS
IMPORTANT!
Read the instructions for use carefully before using the instrument.
Keep them in a safe place for consultation when necessary.
Whether on or off, keep the instrument out of reach of children.
This equipment is a high quality precision instrument which must
be handled with care. Avoid shocks and vibration. After use, al-
ways replace the instrument in its carrying bag. Make sure that the
bag and instrument are dry; otherwise condensation may occur in
the device. Make sure that the windows are free of dirt, and clean
them using a soft cloth and a glass cleaning device only. Always
use the locking device during transportation. Regularly inspect
the accuracy of the instrument, especially when starting any major
square-setting work. You have the sole responsibility for the
accuracy of your work. Do not use any optical equipment such as a
magnifying glass to view the laser beam, and take care to remove
all reflecting objects to avoid damage to the eye. Locate the laser
in such a way that it is not possible for any person to look at the
laser beam (intentionally or otherwise). Under no circumstances
take the instrument apart, since this may expose you to powerful
laser radiation. The laser may only be used for the projection of
laser lines. Do not use the instrument in rain or near flammable
materials. Technical modification or alterations to the instrument
may be carried out without prior notice. The manufacturer’s re-
sponsibility shall in no case exceed the value of the costs of repair
or replacement of the instrument. Respect the environment and
do NOT discard the instrument or batteries in household waste.
Take them to a recycling centre.
First steps
Remove any protective films.
Open the battery compartment and insert batteries. Respect the
indicated polarity.
Make sure that the instrument is not on too much of a slope (within
4,5°). If the slope of the instrument should exceed 4,5°, the lasers
will flash automatically.