A Look at the Radio’s Functions, Step by Step
LV1
FUNCTIONS for the New 3PK User and the Racers and Experts Alike
Level Selection
LEVEL-SEL
Levels
LV1, LV2, LV3
DEFINITION:
Selects the complexity of functions displayed on the menu screens.
Includes 3 levels of flexibility to simplify programming for new users and the
most flexible system in the world to those who wish to use it.
AVAILABLE FOR EACH INDIVIDUAL MODEL:
•
Selection of a lower level simply hides the higher level features from the menu;
however, setups in the higher level menus remain intact and as set prior to
changing the level.
•
Model reset clears all functions including those not visible in the displayed menus.
ADJUSTABILITY:
•
Level 1 (Learning the system; quick setups, a single menu with enough features for most models.)
LV1
•
Level 2 (Expands upon Level 1 menu, with many race-ready features.)
LV2
•
Level 3 (For the Expert driver, boat modeler, or other complex setups.)
LV3
•
To view features available on each menu, see page 11.
DEFAULT
:
LV3
INTERACTION:
NONE. Changing the complexity of what menu is visible has no effect on the programming whatsoever.
To adjust features set in a higher level and not currently visible, simply change the level back to the higher level and edit.
DESIRED END RESULT:
Provide only as much information/access as needed without overwhelming the user with
features not currently desired.
CAUTION:
Just because you change to a lesser level does NOT reset hidden functions to their defaults or to inhibited.
Be sure to inhibit any undesired functions and check settings which interact with other functions. (Example: throttle
ATL.)
12
GOAL:
Change setting from the default of Expert
Driver (
LV3
) to New User (
LV1
) to simplify
getting to know the basics of the radio. (If
on
LV1
or
LV2
, scroll through menus, then
select
LEVEL-SEL
.)
Where next?
STEPS:
Open menu and display menu 3.
Select menu 3 & then select level
selection.
Select level 1.
Confirm your change
.
Close.
INPUTS:
to
LEVEL-SEL
.
together for 1 second.
Screen displays
LEVEL = LV1
Name the model (
MDL-NAME
): See p. 15.
Select modulation (FM/PCM/HRS) (
MOD-MODE
): See p. 16.
Channel reversing (
CH-REV
): See p. 18.
End point adjustment (ATV) (
EPA
): See p. 18.
