AIRBRAKE
mixing
(
ACRO
):
Like
FLAPERON, AIRBRAKE
is one function that is really made up of a series of pre-programmed mixes all done for you
within the radio.
AIRBRAKE
simultaneously moves the flap and elevator, and is usually used to make steep descents or
to limit increases in airspeed in dives.
This function is often used even on models without flaps as an easy way to use the flaperons.
Adjustability
:
Activation
: set positions by flipping
S
WITCH
G
.
Provides
AIRBRAKE
response immediately upon switch movement, going to a pre-set travel on each active channel
without any means of in-flight adjustment.
Channels controlled:
Elevator and flap may be set independently in
AIRBRAKE
, including set to
0
to have no effect.
Note:
If using
FRAPERON
with channel 5 or 7 the
AIRBRAKE
has separate settings for the aileron servos working
as flaperons and the flap.
52
GOAL of EXAMPLE:
STEPS:
INPUTS:
Activate
AIRBRAKE
on a
FLAPERON
model. Adjust the flap travel to 50%,
with negative elevator (push) of
10%
.
Where next?
Confirm
FLAPERON
is active.
Open the
AIRBRAKE
function.
Activate the function.
Adjust the travels as needed. (Ex:
Flap
50%
, Elevator
-10%
.)
Close menu.
see
FLAPERON
instructions.
for 1 second.
(If
basic
,
again.)
to
AIRBRAKE
.
Switch
G
in up position.
to
OFF
.
to
-10%
.
to
50%
.
Adjust flaperons' total flap travel available (
FLAPERON
): see p. 43.
Set up
ELEV-FLAP
mixing: see p. 49.
View additional model setups on the internet:
www.futaba-rc.com\faq\faq-7c.html.
