72
Common function
Function
Method
① Call the menu screen from the
home screen by pressing the
+ key
for 1 second.
＋
② Select
from the menu with the
Jog
key
.
③ Open the setting screen by
pressing the
Jog key
.
（1 second）
Calling the setting screen
The servo display/servo test function displays the
CH1 to CH6 servo output bar graph and tests servo
operation.
' ! ! /
J ! ! /
!
! #
/ ! Q
VW &* /
XZ[ &@/* / '
J # ? ?W$?
!
"SERVO"
SERVO
Servo monitor ／ Servo test
(Common)
(Servo Monitor）
● Select the setting item
with the
Jog key
.
Switching to the servo test
screen
● Switch the screen by selecting
TEST and operating the jog
key to the left and right.
● The servo operating position
of each channel is displayed
on a bar graph.
(Servo Test）
Servo test ON/OFF
Channel Select
Screen change
● Where "
GRPH
" is chosen, a
Jog key
is pressed in right or
left.
Type Select
Cycle Select
Speed setting
● Operation of a servo test
■ Type/cycle/speed setting
① Select the setting item (TYPE, CYCL,
SPD) with the Jog key and set the item
by pressing the + key or ‒ key.
＋
−
or
（Range ／ Default）
TYPE：
LNR, JMP
／
LNR
CYCL：
1 〜 100
／
10
（full speed at 1）
SPD：
1 〜 100
／
7
（full speed at 100）
■ Channel selection
② Select the channel you want to
test with the
Jog key
and select
ACT/INH by pressing the
+ key
or
‒ key
.
＋
−
or
Selection range：
ACT, INH
Default：
INH
（only CH1 is ACT）
■ Servo test start/stop
③ Select the
"TEST"
item
w i t h t h e
J o g k e y
a n d
start/stop the servo test
by pressing the
+ key
or
‒
key
.
＋
−
or
Selection range：
ON, OFF
Default：
OFF
Servo test
Using the servo test will move the servos to
$
installed. Using it may damage the servo and
linkage.
CAUTION
