59
Common function
Function
Method
① Call the menu screen from the
home screen by pressing the
+ key
for 1 second.
＋
② Select
from the menu with the
Jog
key
.
③ Open the setting screen by
pressing the
Jog key
.
（1 second）
Calling the setting screen
0 〜
140%
0 〜
140%
The End Point function adjusts the
left and right servo throws, generates
differential throws, and will correct
improper linkage settings.
' @
!
Servo throw
At 100% setting the servo throw of each channel is about 40°
for channels 1 to 4 and about 55° for channels 5 and 6.
However, the maximum servo travel for channels 5 and 6 is
about 110%.
*When channels 5 to 6 were mixed by 2 AIL etc, the throw
becomes the same (about 40° ) as channels 1 to 4.
"E POINT"
● Select the channel with
the
Jog key
.
● T h e s e t t i n g r a t e o f e a c h
channel
（Left ／ Down）
rate display
（Right ／ Up）
rate display
E POINT
End point
(Common)
① A channel is chosen by
Jog key
.
Selection range：
1 〜 6ch
② Operate the stick or knob of the selected
channel fully to the left (down) or right (up)
and adjust the rate by pressing the
+ key
or
‒ key
.
or
Range：
0 〜 140%
Default：
100%
● When you want to
return the set value
to the initial value,
press the
+ key
and
‒
key
simultaneously.
Adjust the rate of each direction of the stick and VR by repeating step ① .
End point
＜ ChannelDisplay ＞
＋
−
AIRPLANE (2AIL1FLP)
HELICOPTER
GLIDER (2AIL2FLP)
MULTICOPTER
1: AI1（Aileron1）
1: AIL（Aileron）
1: AI1（Aileron1）
1: AIL（Aileron）
2: ELE（Elevator）
2: ELE（Elevator）
2: ELE（Elevator）
2: ELE（Elevator）
3: THR（Throttle）
3: THR（Throttle）
3: FL3（Flap3）
3: THR（Throttle）
4: RUD（Rudder）
4: RUD（Rudder）
4: RUD（Rudder）
4: RUD（Rudder）
5: FLP（Flap）
5: GYR（GYRO）
5: FL5（Flap5）
5: AUX
6: AI6（Aileron6）
6: PIT（Pitch）
6: AI6（Aileron6）
6: MOD（Mode）
Select the Left/Right (Down/Up)
with the
stick (SW,VR)
.
