20
Reference
Reference
Ratings
Communication method:
One-way operation system
Maximum operating range:
80m (Optimum condition)
For safety:
F/S (Throttle), ID (About 4 billion ways of pair
identifications)
Transmitter T3PRKA
(FHSS system, wheel type, 3 channels)
Transmitting frequency:
2.4GHz band
Power requirement:
(Dry cell battery) Penlight x 4(6V)
Current drain:
100mA or less
Transmission antenna:
1/2λ di-pole (Built-in)
Receiver R203GF:
(FHSS/S-FHSS system, 3 channels)
Power requirement:
4.8V
～
7.4
V Rechargeable battery
Size:
26x39x10mm (excluding a projection part)
Weight:
8g
Servo S3003
(Standard servo)
Power requirement:
6V (common with receiver)
Current drain:
8mA (at 6V / Idle)
Output torque:
4.1kg-cm (57in.-oz.) at 6V
Operating speed:
0.19sec/60 degree at 6V
Size:
40.4x19.8x36mm (1.59x0.78x1.42in.)
Weight:
37.2g (1.31oz.)
Servo S3050
(Standard digital servo)
Power requirement:
6V (common with receiver)
Current drain:
8mA (at 6V / Idle)
Output torque:
6.5kg-cm (90.3oz.-in.) at 6V
Operating speed:
0.16sec/60 degree at 6V
Size:
40.0x20.0x38.1mm (1.57x0.79x1.50in.)
Weight:
49g (1.72oz.)
E.S.C. MC230CR / MC330CR
(Electronic speed control)
Operating system:
Forward, reverse, and brake operations are all
linear.
Power requirement:
Ni-Cd/Ni-MH battery 6-7 cells (7.2 to 8.4V)
PWM frequency:
1.5kHz (fixed)
Setting:
One-touch input by pushbutton switch. Set data is
saved to built-in EEPROM.
Current capacity (FET rating):
Forward=90A/200A, reverse=45A/100A
Size:
27.1x33.3x12.8mm (1.07x1.31x0.50in.)
(excluding protruding parts)
Silicon cord gauge size:
AWG16/AWG14 equivalent
Weight:
44/45g (1.55/1.59oz.)
(including connectors and switches)
BEC voltage:
6.0V
*Specifications and ratings are subject to change without prior notice.
NOTE:
Futaba FHSS system, T3PRKA transmitter and R203GF receiver, does
not work with current Futaba FASST system. Please use T3PRKA and R203GF in
pairs. Futaba FASST system and FHSS system are not compatible each other.
