FUTABA 3PKS Скачать руководство пользователя страница 60

Страница: 60 / 116

Setting item

MODE

:Speed type selection

LOW

:Low side range speed
adjustment

HIGH

:High side range speed
adjustment

TGP1

:Low and medium speed
switching point

Setup item selection

- Select by (JOG) button up or down operation.

Setting item

MODE :Speed type selection
ALL

:Speed adjustment

Setup item selection

- Select by (JOG) button up or

down operation.

nction

Throttle Speed "THSPD"

(Preparation)

- Select the setting item "MODE" by (JOG) button up or down

operation. Press the (+) or (-) button and select "1 SPEED".

("ALL" delay adjustment)

Select "ALL" by (JOG) button up or down operation.

Use the (+) or (-) button to adjust the delay of the entire

throttle forward side range.

When ending setting, return to the initial screen by pressing

the (END) button twice (for direct selection, press the (END)

button once).

Adjustment method for 1 SPEED

When a value of 99 or less is
set at ALL setting, the displays
is switched from OFF to ON by
trigger operation.

Adjustment range

LOW

:1~100

HIGH

:1~100

At 100%, there is no delay.
TGP1 :1~100

(Preparation)

- Select the setting item "MODE" by (JOG) button up or down

operation. Press the (+) or (-) button and select "2 SPEED".

("LOW" and "HIGH" delay adjustment)

Select "LOW" or HIGH" by (JOG) button up or down opera-

tion.

Use the (+) or (-) button to adjust the delay of the entire

throttle forward side range.

(Speed switching point adjustment)

When you want to change the "LOW" and "HIGH" switching

point, select the setting "TGP1" by (JOG) button up or down

operation.

When ending setting, return to the initial screen by pressing

the (END) button twice (for direct selection, press the (END)

button once).

Adjustment method for 2 SPEED

When a value of 99 or less is set
at either LOW or HIGH, the dis-
play is switched from OFF to ON
by trigger operation.

Throttle trigger position

The LOW and HIGH ranges
are linked to the TGP1 set
point and displayed.

Adjust button

- Adjust with the (+) and (-) but-

tons.

- Return to the initial value by

pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value
LOW, HIGH :"100"
TGP1 :30

Speed type Select button

- Select with the (+) or (-) but-

tons.

Adjust button

- Adjust with the (+) and (-) but-

tons.

- Return to the initial value "100"

by pressing the (+) and (-) but-
tons simultaneously for about 1
second.

Adjustment range

1~100% (each direction)
At 100%, there is no delay.

Speed type Select button

- Select with the (+) or (-) but-

tons.

Содержание 3PKS





















































































































Результаты поиска

Содержание 3PKS

Отзывы:

Похожие инструкции для 3PKS

Бренды по названию

Популярные бренды

FUTABA 3PKS, Инструкция по эксплуатации

Результаты поиска

Содержание 3PKS

Отзывы:

Похожие инструкции для 3PKS

Бренды по названию

Популярные бренды