92
Fu
n
c
tio
n
Timer Function "TIMER"
Use the timer by selecting one of the four timers UP TIMER, DOWN TIMER, LAP
TIMER and LAP NAVIGATE timer.
UP TIMER function
- The UP TIMER can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch
is operated and accumulates the time between each start
and stop. (When the count reaches 99 minutes 59 seconds,
it returns to 00 minutes 00 seconds and repeats the count.)
- The first start operation can be linked to the throttle trig-
ger.
- An alarm sound can be set. The passage of time is announced by sounding of a buzzer
(beeps) each minute after starting.
- Alarm
:Generates a beep at the set time (minutes).
- Prealarm :Alarm advance announcement sound. Sounding starts the set time (seconds) before the
alarm. (beeps)
- After starting, the timer is enabled and can be stopped by switch even when the display
switches to another screen.
Timer Function "TIMER"
FUEL DOWN TIMER function
The fuel down timer is used primarily to check the refueling time of gasoline engine
cars. (The remaining time is displayed.)
- Each time the switch is pressed, the timer is restarted and
the set time is counted down. The start time becomes the
alarm set time. (When counted down to 00 minutes 00 sec-
onds, the timer becomes an up timer.)
- The fuel down timer can be initially started by throttle trigger.
- An audible alarm can be set. In addition, the passing of time is indicated by sounding
of a buzzer each minute after starting.
- Alarm
:Buzzer sounds at the set time (minute).
- Prealarm :Alarm advance notice sound. Beeping begins the set time (seconds) before the alarm.
- After starting, the timer continues to count even if the LCD switches to another screen.
