FUST PRIMOTECQ TA 506 E, Руководство пользователя

Страница: 32 / 42

32
another position
during the pro-
gramme or when
you depress an
option button dur-
ing the cycle
• at the end of the
programme.
The corresponding
light comes on.
Start
Press this button to
start the dryer after
having selected the
programme and the
options. The relevant
light will stop flashing.
If the programme
selector dial is turned
to another position,
when the machine is
running, the buzzer
will sound and the
programme phase
indicator lights will
flash. The drum turns
alternately in both
directions during dry-
ing.
Mains On light
Comes on when the
appliance is switched
on (“Ein/Aus” button -
pressed down) and
goes out when this
button is released.
All drying pro-
grammes end with a
10 minute cooling
phase (light Cooling is
on). You may remove
the laundry after this
phase.
Indicator lights
These lights indicate
the following functions:
• Drying light
This light indicates
that the appliance is
in the drying phase.
• Cooling light
This light indicates
that the appliance is
in the cooling phase.
At the end of drying,
there is a 10 minute
cooling phase to cool
the laundry.
• End of programme
light
This light is on at the
end of the cooling
phase, during the
anti-creasing phase
and at the end of the
programme.
• Filter cleaning
This light illuminates
at the end of the pro-
gramme to remind
you that the filters
must be cleaned.
Cancelling a
programme
Turn the selector dial
to “ O ” to cancel a pro-
gramme which is run-
ning. Now you can
select a new pro-
gramme.
At the end of the
programme
All drying pro-
grammes end with a
10 minute cooling
phase.
If the laundry is not
removed at the end of
the cycle, the dryer
performs an anti-
creasing phase (dura-
tion: 30 minutes maxi-
mum).
If you do not remove
the laundry, the dryer
will stop automatically
at the end of the anti-
creasing phase.
Lights end and filter
remain lit and the
buzzer sounds for 2
minutes. Turn the pro-
gramme selector dial
to “0”; all the lights go
out. The appliance is
switched off.
Remove the laundry.
If you open and then
close the door before
turning the selector
dial to “0” all the indi-
cator lights come on.
After each use
• Clean the filters.
Important!
If the drying pro-
gramme has to be
stopped before it
reaches the end, we
recommend that you
turn the programme
selector dial to posi-
tion Cooling and
wait until the end of
this cooling phase
before removing the
laundry. This will
avoid a build-up of
heat inside the appli-
ance.To do this first
turn the dial to “ O ”
and then to Cooling
and depress Start but-
ton.
Modifying
the programme
To change a pro-
gramme which is run-
ning, first cancel it by
turning the pro-
gramme selector dial
to “ O ”. Select the new
programme and press
the Start button.