Fusionstor INVENTO i737e SERIES, Руководство пользователя

Страница: 5 / 78

4 | P a g e
Chapter 1
Introduction
1-1 Overview
The Invento i737e is a high-end workstation comprised of two main subsystems: the Mid-Tower chassis and the Fusionstor dual Intel®
Xeon® processor serverboard.
In addition to the serverboard and chassis, various hardware components have been included with the Fusionstor Invento i737e, as
listed below:
•
One 12cm rear exhaust fan(s) with Optional 1 x 12cm (front) cooling fan
•
Two active CPU heatsinks
•
High-efficiency power supply
•
SATA Accessories
One SATA backplane
Four 3.5" HDD drive bays and four optional 2.5" HDD drive bays offer maximum storage capacity
1-2 Serverboard Features
At the heart of the Fusionstor Invento i737e lies the motherboard a dual processor serverboard based on the Intel® C612 chipset.
Below are the main features of the motherboard.
Processors
The Fusionstor motherboard supports single or dual Intel E5-2600 v3/v4 processors in LGA 2011 sockets (Socket R3).
Memory
The motherboard has 16 DIMM slots that can support up to 2 TB of LRDIMM (Load-Reduced DIMMs) or 512GB of RDIMM (Registered
DIMMs) ECC DDR4 2400/2133/1866/1600 memory.
SATA
A SATA controller is integrated into the chipset, which provides support for ten SATA 3.0 ports on the serverboard. RAID 0, 1, 5 and 10
are supported. The motherboard also provides two power connectors for SATA DOMs (Device-On-Module).
PCI Expansion Slots
The motherboard has three PCI-E 3.0 x16, two PCI-E 3.0 x8 and one PCI-E 2.0 x4 (in a x8 slot) slots.
Onboard Controllers/Ports
The rear I/O ports include one 6x USB 3.0 ports (4 rear + 2 via header), 5x USB 2.0 ports (2 rear + 2 via 1 Type A), two Gb
Ethernet ports and HDA (High Definition Audio) ports.