FusionHealth SleepSMART DreamWear, Инструкции по использованию и монтажу

Страница: 2 / 20

2
1. DreamWear nasal mask with under-the-nose cushion.
The DreamWear nasal masks will include medium-sized headgear and 4 different sizes of
cushions (Small (S), Medium (M), MediumWide (MW), Large (L)).
Assembly/disassembly (nasal mask)
Assembly
Tip: Align the triangles on the cushion and frame for proper
assembly.
1. Cushion: Press into the mask frame until the cushion clicks into
place. 9 10
Note: The end of the cushion and the opening in the mask frame
are ‘ D ’ shaped. The cushion end should match the frame.
2. Connector (elbow): Insert into the top of the mask frame.
3. Tubing quick release: Push the tubing quick release onto the
elbow until it clicks into place.
4. Fabric sleeves: Wrap the sleeves around the mask frame and
press the strips together (see 3
rd
diagram just below under
“Disassembly”).
Note: The sleeve seams should be on the outside of the frame.
5. Headgear: Slide the tabs into the slots on the mask frame and
fold backwards.
Note: The Philips Respironics logo will be on the outside and
facing up when correctly assembled.
Cautions:
•
Do not overtighten the headgear straps. Watch for signs of overtightening, such as excessive
redness, sores or bulging skin around the edges of the mask. Loosen the headgear straps to
alleviate symptoms.
•
Do not block or seal off the exhalation ports.
Tubing quick release