FusionHealth SleepSMART DreamWear, Инструкции по использованию и монтажу

Страница: 12 / 20

12
3. DreamWear Nasal Pillows
The DreamWear nasal pillows includes medium-sized headgear and 3 different sizes of
cushions (Small (S), Medium (M), Large (L)).
The nasal pillows are interchangeable with the nasal mask/headgear. To change from the
nasal mask to the nasal pillows, pop out the nasal cushion by simply releasing the nasal
mask and snapping on the nasal pillows.
Assembly and Disassembly (nasal pillows)
Assembly
1. Align the triangles on the cushion and mask frame. Press the cushion into the frame until it
clicks into place (figure steps 9, 10).
Note: The end of the cushion and the opening in the mask frame are “D” shaped. The cushion
end should match the frame.
2. Insert the connector (elbow) into the top of the mask frame.
3. Push the tubing quick release onto the elbow until it clicks into place.
4. Wrap the fabric sleeves around the mask frame and press the strips together.
Note: The sleeve seams should be on the outside of the frame.
5. Headgear assembly:
Cautions:
• Do not overtighten the headgear straps. Watch for signs of overtightening, such as
excessive redness, sores, or bulging skin around the edges of the mask. Loosen the
headgear straps to alleviate symptoms.
• Do not block or seal off the exhalation ports.
Tubing quick release