Fusion PS-A302B, Инструкция по установке

Страница: 2 / 4

13
If there is a concern that water may enter the mounting
surface around the edges of the stereo, apply marine sealant
around each of the screw holes and between the stereo and
the mounting surface (optional).
NOTICE
Do not apply grease or lubricant to the screws when
fastening the stereo to the mounting surface. Grease or other
lubricants can cause damage to the stereo housing.
14
Secure the stereo to the mounting surface using the included
screws , or screws appropriate for the depth of the
mounting surface.
NOTE: Do not over tighten the screws, especially if the
mounting surface is not flat.
15
Press the trim firmly onto the stereo until all of the pins
snap into place.
Connector Identification
Item Connector Connects to
External antenna External AM/FM antenna
AUX IN 1 Audio sources, such as a CD player, TV, or
another FUSION stereo
AUX IN 2 Audio sources, such as a CD player, TV, or
another FUSION stereo
Line out RCA line out, switchable between variable and
fixed output
Power 12 V +, -/ground, and external amplifier on
Connecting to Power
When connecting the stereo to power, you should connect it
through the ignition or another manual switch.
If it is necessary to extend the power and ground wires, use
14 AWG (2.08 mm
2
) wire. For extensions longer than 1 m (3 ft.),
use 12 AWG (3.31 mm
2
) wire.
1
Route the red power wire to the ignition or another manual
switch , and route the black ground wire to the battery.
2
If necessary, route a wire between the switch and the
battery .
3
Route the wiring-harness plug to the stereo.
Do not connect the wiring harness to the stereo until after all
of the bare wire connections have been made.
4
Connect the black wire to the negative (-) battery terminal.
5
Connect the red power wire to the ignition or another manual
switch, and connect the switch to the positive (+) battery
terminal if necessary.
6
Connect the wiring harness plug to the stereo.
Stereo Information
Registering Your FUSION Panel-Stereo
Help us better support you by completing our online registration
today.
• Go to
www.fusionentertainment.com .
• Keep the original sales receipt, or a photocopy, in a safe
place.
Cleaning the Stereo
NOTE: This stereo is rated IP65 for protection in harsh
environments. It is not designed to withstand high pressure
water spray, which may occur when you wash down your
vehicle or vessel. Failure to carefully spray-clean the vehicle or
vessel may damage the product and void the warranty.
NOTICE
Do not use harsh or solvent-based cleaners on the stereo. Using
such cleaners may damage the product and void the warranty.
1
Clean all salt water and salt residue from the stereo grille with
a damp cloth soaked in fresh water.
2 Use a mild detergent to remove a heavy buildup of salt or
stains.
Dimension Drawings
Rear View
Dimensions are shown without the trim attached.
Dimension Measurement
341 mm (13.43 in.)
320 mm (12.61 in.)
152 mm (6 in.)
132 mm (5.19 in.)
2 Important Safety Information