Fusion PALADIN L120 Pro, Руководство по эксплуатации

Страница: 10 / 16

8
3. ChArgE DAtA SEtup mEnu
Li-lon/Po & Pb battery Set the charge capacity. Note: In case of charging Lithium
batteries, it is NOT possible to set charge rates over 2C of the selected battery
capacity.
CHARGE MODE
C5.0A d15mV
SETUP
NiCd & NiMH battery Set charge capacity and Delta peak sensitivity.
UP/DOWN
CHARGE MODE
C5.0A d15mV
SETUP
UP/DOWN
CHARGE MODE
C:5.0A d:15mV
SETUP
CHARGE MODE
C5.0A
SETUP
UP/DOWN
CHARGE MODE
C5.0A
SETUP
DISCHARGE MODE
D2.0A 0.8V/CELL
SETUP
UP/DOWN
DISCHARGE MODE
D2.0A 0.8V/CELL
SETUP
UP/DOWN
DISCHARGE MODE
D2.0A 0.8V/CELL
SETUP
DISCHARGE MODE
D2.0A 3.0V/CELL
SETUP
UP/DOWN
DISCHARGE MODE
D2.0A 3.0V/CELL
SETUP
UP/DOWN
DISCHARGE MODE
D2.0A 3.0V/CELL
SETUP
DISCHARGE MODE
D:2.0A
SETUP
UP/DOWN
DISCHARGE MODE
D:2.0A
SETUP
Li-lon/Pro battery Set discharge rates and discharge cut-off voltages.
Pb battery Set discharge rates (The Discharge cut-off voltage is fixed at 1.8V per cell)
4. DischArgE DAtA SEtup mEnU
NiCd & NiMH battery Set discharge rates and discharge cut-off voltages.
NiCd & NiMH battery only Set cycle direction and cycle times.
CYCLE MODE
CHG DCH 1 TIME
SETUP
UP/DOWN
CYCLE MODE
CHG DCH 1 TIME
SETUP
UP/DOWN
CYCLE MODE
CHG DCH 1 TIME
SETUP
5. CyclE DAtA SEtup mEnu