background image

introduction

Thank you and congratulations for choosing FUSION Car Security for your alarm requirements. FUSION alarms have been 

significantly improved throughout the years to assure quality and reliability. The latest in technology has been incorporated 

into every security product providing you with incredible security and unparalleled performance. Our simple yet highly 

developed circuitry, contributes to the ultimate in circuit stability. This is why we are sure that your new FUSION security 

system will provide you with peace of mind for years to come.

Manufacturing quality vehicle security is not all FUSION has accomplished. Check out our full line up of head units, signal 

processors, component speakers, full range speakers, amplifiers and of course, our wide range of high performance 

subwoofers. Explore the potential of FUSION Car Audio and Security and most of all, enjoy the experience!

C A R   A L A R M   F E A T U R E S

C O D E   L E A R N I N G   T R A N S M I T T E R  

a.

  With the Ignition ON, press the valet switch 10 times within 8 seconds, the siren will chirp 3 times to enter code learning mode.  

 

(3 transmitters maximum).

b.

  Press any button on the transmitter within 8 seconds. If over 8 seconds or the ignition is turned OFF, the system will exit code  

 

learning mode automatically.

c.

   The siren will chirp for confirmation as soon as a new code is learned. For example, when the first transmitter is learnt, the    

 

siren will chirp once. When the second transmitter is learnt, the siren will chirp twice and so on. 

d.

  If one of the transmitters is to be programmed, all other transmitters must be reprogrammed at the same time. 

A R M I N G  

a.

  Press button 1.

b.  

Siren will chirp once for ARM indication or no chirp if the function is disabled (Programmable Function 6).

c.  

Park lights will flash once.

d.  

Doors will lock (if central locking installed).

e.  

LED will flash slowly. If door is not closed, the siren will chirp 6 times for warning and LED flashes quickly.

f.  

Disables the engine if the engine disable Interrupt Relays are connected.

g.  

After 3 seconds, the system is ARMED. If the alarm is triggered within 3 sec, the siren will chirp twice and the circuit is by-passed  

 

until the triggering source is stable.

D I S A R M I N G

a.

  Press button 2. 

b.

  Park lights will flash 2 times, siren will chirp 2 times or no chirp if function disabled (Programmable Function 6).  

c.  

If siren chirps 3 times, the alarm has been triggered in your absence (See LED Status reporting below).  

d.

  Doors will UNLOCK (if central locking installed). Some vehicles UNLOCK the drivers door first on the first press of the UNLOCK  

 

button. If this is the case then when DISARMING the alarm you will need to press and hold the UNLOCK button for 2 seconds.  

 

This should trigger the remaining doors to UNLOCK. 

L E D   S T A T U S   R E P O R T I N G

a.

  On DISARMING if the siren chirps 3 times the alarm has been triggered in your absence. 

b.

  The parking lights will flash the number times according to the ZONE triggered your absence.

c.

   With the ignition OFF the LED will be flashing a report code to tell you which ZONE triggered in your absence. The flashing    

 

sequence will remain to flash for 30 seconds and will be reset by turning on the ignition, codes are spaced by 1.5 seconds.

 

 

Zone 4

 - 

SHOCK

 

SENSOR

 port trigger, 3 Siren chirps, 4 Light flashes and the LED flashes 4 times per cycle  

 

 

Zone 5

 - 

AUX

 

SENSOR

 port trigger, 3 Siren chirps, 5 Light flashes and the LED flashes 5 times per cycle 

 

 

Zone 6

 - 

DOOR

 trigger, 3 Siren chirps, 6 Light flashes and the LED flashes 6 times per cycle 

   

Zone 7

 - 

TRUNK

 trigger, 3 Siren chirps, 7 Light flashes and the LED flashes 7 times per cycle           

 

 

Zone 8

 -

 IGNITION

 trigger, 3 Siren chirps, 8 Light flashes and the LED flashes 8 times per cycle. 

d.

   To reset the LED status reporting feature, turn the ignition ON.

R E M O T E   C O N T R O L

 

Functions     

Conditions

a.

  ARMS alarm and locks doors (if installed) 

Alarm is DISARMED

b.

  Car finder with sound 

Alarm is ARMED

c.

  Temporarily stops alarm from sounding 

Alarm is sounding

d.

  Locks doors (if central locking is installed) 

While Driving

e. 

Pressing for 2 seconds will trigger the window  While DISARMED

  Closure module (if installed)

 

a.  DISARMS alarm 

Alarm is ARMED

b.  Unlocks doors (if central locking installed) 

While Driving

c.   Stops alarm from sounding 

Alarm is sounding

d.  Press and hold for 2 seconds to activate  

While Disarming

 

2ND Unlock (if selected see page 4)

a.  ARMS alarm silently 

Alarm is DISARMED

b.  Car finder without sound 

Alarm is ARMED

c.   Anti-car-jack (see page 4) 

While driving

d. Temporary Last Door Arming and 

Before turning off vehicle

     Automatic Immobiliser Bypass 

Activates Channel 2 Output to Open trunk,  

Ignition OFF

window roll up or even Auto Start Modules. 

Alarm is DISARMED

Activates PANIC MODE 

Anytime

Button #

1

2

3

2 + 3

1 + 2

Note: Please refer the above table and operating instructions for all alarm functions.

f-3500

V

ehicle Se

curity S

yst

em

V

e

h

ic

le

 S

e

cu

ri

ty

 S

y

s

te

m

1

Button 1

Button 2

Button 3

The F-3500 vehicle security system is approved by FCC.

FCC ID:QRNF3500

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may 

not cause harmful interference and (2) This device must accept any interference received, including interference that may 

cause undesired operation.

Содержание F-3500







Отзывы: