Fusion ECLIPSE LX61B Pro, Руководство по эксплуатации

Страница: 4 / 16

2
SAFEty prEcAutions
• DO NOT attempt to charge incompatible types of rechargeable batteries.
This charger is designed to only charge and discharge Nickel-Cadmium,
Nickel-Metal Hydride, Lithium-Ion, Lithium-Polymer, LiFePO4 and Lead-
Acid batteries.
• Make sure you place the charger on a firm level surface for charging.
•
DO NOT attempt to charge batteries at excessive fast charge currents.
Check with your battery manufacturer for the maximum charge rate
applicable to your battery.
•
DO NOT
use automotive type battery chargers to power the charger.
• DO NOT leave the charger unattended while charging. Disconnect
the battery and remove input power from charger immediately if the
charger becomes hot. Allow the charger or battery to cool down before
reconnecting.
•
DO NOT
allow water, moisture or foreign objects into the charger.
• DO NOT place the battery or charger on or near a flammable object
while in use. Keep away from carpets, cluttered workbenches, etc.
• DO NOT cover the air intake holes on the charger as this could cause
the charger to overheat.
• Connect the input leads to the mains, or a 12V power supply first, then
connect the battery.
• DO NOT disassemble the charger.
• This unit is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to
ensure that they can use it safely.
• Young children should be supervised to ensure that they do not play
with the charger.
• DO NOT attempt to charge non-rechargeable batteries.
• Lead-Acid batteries must be placed in a well ventilated area when
charging.
• DO NOT attempt to charge whilst the input 12 volt battery is being
charged, as the voltage supplied to the charger may be too high.