14
HOW TO RESET THE UNIT
Using the Reset button, you can reset the unit to its default
settings.
• The RESET button is located on the main unit (as shown on
the diagram). Press it in with a ballpoint pen or metal object
to activate it.
• The reset button can be used under the following
circumstances:
1. Initial installation of the unit when all wiring is completed.
2. If the unit “freezes”.
3. To RESET the unit to the factory configuration
4. Error indication on the LCD display.
PRODUCT SPECIFICATIONS
Power Supply
12V DC (11-16V), Negative Ground
Fuse
15A
Speaker Impedance 4 – 8Ω
Power output
MOSFET 50W MAX x 4 channels
RMS output
22W x 4 @ 10% THD
Pre-AMP output
2.0 V (USB play mode; 1KHZ, 0dB, 10 k Ω
load)
Aux-In level
≥
300mV
iPod/iPhone
Charging
USB, 1A
RADIO
-FM
Frequency Range 87.5 – 108MHz,
50kHz Step (Oceania)
87.5 – 107.9 MHz 200kHz Step (USA)
87.5 – 108.0 MHz 50kHz Step (Europe)
87.5 – 108 MHz
(FM 1/2) (Russia)
+ 65MHz – 74MHz (FM3) (Russia)
Usable Sensitivity Better than 15dB at S/N 30dB
-AM(MW)
Frequency Range 522 –1620KHz (Oceania)
530 – 1710 KHz (USA)
522 – 1620 KHz (Europe)
522 – 1620 KHz (Russia)
Usable Sensitivity Better than 45dB
USB DEVICES:
USB flash memory USB 1.1 & 2.0 compatible
