Fig. 31
Fig. 32
Fig. 33
Fig. 34
13
5 Troubleshooting
● The here described tasks for troubleshooting can be done mostly by the operator.
● Some tasks only may be done by especially trained personal or by an authorised service
centre. These tasks are marked with (S).
Malfunction
Cause
Rectification
Top blade does not
move
Clipper head is not well engaged Engage the clipper head correctly when
the motor is running
Turning lever is defective
Replace turning lever (S)
Motor is not
running
Battery is dead
Charge battery
Contacts dirty
Switch clipper off and clean the contacts
Faulty battery
Replace battery
Smell of burning from
the motor housing. Motor
burned out
Have motor and / or electronics
replaced (S)
