background image

 

 

HANDLING PRECAUTIONS FOR THIS UNIT 

 
When using this unit, follow the instructions given below in order to prevent danger to 
you or nearby people or to prevent failure of this unit. 
   

 WARNING 

Never use the unit near flammable material such as gas, gunpowder, etc.   
The material may explode and the unit may burst or burn.

 

This unit is not splash-proof.    Do not use the unit in the environment where 
splash or rain drop is anticipated.    Never use the unit which was 
water-splashed.    If so done, the unit may burn due to short circuit.

 

Never use the unit in the environment where strong shock or vibration is 
anticipated.    The unit may burn or you may get an electric shock. 

Never leave foreign objects (such as metal) within the unit.    The unit may 
burn or you may get an electric shock. 

When smoking, overheating or odd smell is felt, immediately shut down the 
power supply. 

Do not use this unit for vital or critical mission which requires extraordinarily 
high reliability. 

 

When thunder is coming, do not touch the unit or cables.    You may get an 
electric shock. 

 CAUTION 

Never attempt to disassemble or modify this unit.

 

Never use the unit in dusty environment like desert or in the atmosphere of 
corrosive gas (such as exhaust gas).    Metallic parts such as connector pins 
may deteriorate, resulting in communication errors, etc. 

 

Never use or store the unit in abnormally hot environment such as in direct 
sunlight or near heater.    The unit may be damaged, performance may lower, 
or life may shorten. 

(Cont'd) 

Содержание WN-701-W












































Отзывы: