Furuno RC-1800F2 Series, Руководство по установке

Страница: 33 / 52

3-3
Check point Procedure Pass/Fail
FELCOM 15
NCS common chan-
nel is synchronized 1) Turn on the power.
2) Confirm that “SYNC” appears at the bottom of the
screen.
Position is correctly
input Confirm that position data appears at the lower right
corner and is correct.
Equipment state Confirm the equipment state on the System Status
Monitor
Initialize floppy disk Insert disk in drive, and press F1 , 8 and Enter (twice)
to initialize disk.
Prepare a message,
save it to a floppy
disk as file and open
the file 1) Press F1 , 1 . Prepare message.
2) Press F1 , 4 , and key in file name and press the
Enter to save the file.
3) Press F1 , 2 , and select file.
4) Press the Enter to open the file.
Test Press the F7 , 6 and 3 .
Check Distress Alert
Unit IC-305 for
proper operation. 1. Press the F7 , 6 , 4 and Enter in order. The dis-
tress Alert Button Test mode screen appears.
2. Open the cover on DISTREESS button.
3. Press the DISTRESS button.
4. Confirm that the IC-305 sounds the audible
alarm.
5. Close the cover on the DISTRESS button.
6. Press any key to escape.
Note: FELCOM 15 cannot receive distress alert during
test mode.