Furuno PG-700, Руководство оператора

Страница: 12 / 32

1. HOW TO INSTALL THE EQUIPMENT
4
Bulkhead mounting
The unit can be mounted to the bulkhead either parallel or vertical to the bow.
1. Remove two screws at the bottom to detach the mounting base.
2. Remount the base upside down using the two screws which were unscrewed in the above
step. It is possible to mount the unit in any horizontal direction in 90° steps. Mount the unit so
that the bow mark faces in the direction of the ship’s bow.
3. Fix the mounting base to the bulkhead with three self-tapping screws supplied.
1) Insert one screw in the place for the notched hole, halfway.
2) Set the notched hole in the center of the mounting base to the screw inserted into the bulk-
head at step 1. Set a self-tapping screw in the long round hole. Adjust the mounting base
so it is horizontal and then tighten the self-tapping screws in the long round hole, and the
notched hole, in that order.
3) Fasten the remaining left self-tapping screw.
BOW mark
BOW
Mounting base
Self-tapping screw (4x16, 3 pcs.)
Mounting
base
Notched
hole
Long round hole
1
2