Furuno NAVpilot-611, Руководство по установке

Страница: 52 / 68

3. ADJUSTMENTS
3-24
Using sentences selected on other control unit
You can use the display settings selected on other control unit.
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select “RECEIVE SCREN SETUP NO”.
3. Press the course control knob to show the optional window.
4. Rotate the course control knob to select the control unit No. from which you want to
copy settings.
5. Press the course control knob.
Confirming the input sentences
The INCOMING NMEA0183 DATA window shows the current input sentences.
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select “INCOMING NMEA0183 DATA”.
3. Press the course control knob to show the INCOMING NMEA0183 DATA window.
INCOMING NMEA0183 DATA
AAM BWR GCC HDM RMC VWT
APA DBT GNS MTW VBW WPL
APB DPT GTD MWV VHW XTE
BOD GGA HDG RMA VYG ZDA
BWC GLC HDT RMB VWR
PUSH MENU KEY TO RETURN
TO PREVIOUS MENU.
Current
input
sentence
Incoming NMEA0183 data window
4. Confirm the current input sentences (in reverse video).
5. Press the
TURN/MENU key to close the window.
3.6.3 Setting the function of DODGE keys
You can select the degree which is changed when ◄ or ► key is pressed, among from 5,
10 or 20°.
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select
◄ ► KEY MODE.
3. Push the course control knob to select the setting among from DODGE, +/-5°, +/-10°
and +/-20°.
4. Press the course control knob to set.