(3)
On the TZT12F/16F/19F, or
TZtouch2, access [Settings]
– [Initial Setup] – [Event
Input Configuration] and
select [
Ferry
].
(4)
Select one of the Radar Sensors as the Radar source and adjust the Radar heading to show echoes
in the proper location.
How It Works
(1)
When the boat steers in one direction, use the Radar and Plotter as it is.
(2)
When the boat steers in the opposite direction, press the event switch. The TZT12F/16F/19F will
then send an offset command to the SCX-20, SC-33 or SC30 to offset the heading output by 180°,
while changing the Radar heading line by 180°.
You can see that the Radar echo as well as own ship icon on the Plotter are offset by 180°.
-End-
Rev-1 5/5/2022
