Furuno IF-NMEASC Скачать руководство пользователя страница 7

v

FOREWORD

A Word to the Owner of the IF-NMEASC

Congratulations on your choice of the FURUNO IF-NMEASC Interface Unit. We are confident you 
will see why the FURUNO name has become synonymous with quality and reliability.

For 60 years FURUNO Electric Company has enjoyed an enviable reputation for quality marine 
electronics equipment. This dedication to excellence is furthered by our extensive global network 
of agents and dealers.

This equipment is designed and constructed to meet the rigorous demands of the marine environ-
ment. However, no machine can perform its intended function unless installed, operated and 
maintained properly. Please carefully read and follow the recommended procedures for installa-
tion, operation and maintenance.

Thank you for considering and purchasing FURUNO equipment.

Features

The IF-NMEASC is a dedicated interface unit for the SC-30 Satellite Compass. It receives NMEA 
2000

®

* format heading, pitch, roll and GPS position data from the SC-30, converts them to NMEA 

0183 format data and outputs the converted data to external equipment.

•  Input port: One NMEA 2000 format port
•  Four output ports: NMEA 0183x2, AD-10x1, Analog (pitch and roll)x1
•  Offsets for heading, pitch and roll

*: NMEA 2000 is a registered trademark of the National Marine Electronics Association USA.

Содержание IF-NMEASC





























Отзывы: