Furuno GP-3700, Руководство оператора

Страница: 68 / 185

4. MARKS, LINES
4-10
How to select the display method for mark comments
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [SHOW MARK COMMENTS] on page 1.
4. Select the display method for mark comments.
[ON CHART]: Always displays a mark comment above the mark on the screen.
[IN POPUP]: Displays a mark comment at the bottom of the simple information
when putting the cursor on the mark.
[IN INFORMATION]: Displays a mark comment in the comment line of the detailed
information when putting the cursor on the mark then pushing the
ENTER knob.
5. Press the DISP key to close the menu.
4.8 Mark Filter
Marks can be shown or hidden according to mark attribution.
How to set object and content for the mark filter
1. Push the ENTER knob. The mark filter at the bottom right of the screen is high-
lighted.
Note 1: The mark filter can be selected regardless of cursor state. When the cur-
sor is on, push the ENTER knob to highlight the mark filter at the position where
no target (e.g. a mark) is selected with the cursor.
Note 2: The settings for the mark filter are automatically undone when there is no
operation for 10 seconds.
2. Push the ENTER knob to select the object to filter. Each push of the knob selects
the object as follows:
No indication (no filter)
→ [TYPE] → [COLOR] → [SHAPE] → [DATE] → [TEMP]
→ [DEPTH] → [C. DIR] → [C. SPD] → [MULTI] → No indication (no filter) → …
Each object can be shown or hidden on the mark filter box. For details, see "How
to turn on or off an object to filter" on page 4-12.
3. Rotate the ENTER knob to select content to filter. The marks of selected object
and content to filter are displayed on the screen.
Object for filter Content for filter
Mark filter
Example 1
Object to filter: [COLOR]
Content to filter: [RED] Example 2
Object to filter: [DEPTH]
Content to filter: [32.8ft]