Furuno GP-3700, Руководство оператора

Страница: 14 / 185

1. OPERATIONAL OVERVIEW
1-2
No. Key, control Description
1
POWER/BRILL
• Short press at power-off: Turns the power on.
• Short press at power-on: Opens the [BRILL] window.
• Long press while powered: Turns the power off.
2 MOB Marks a man overboard position at own ship position or cursor po-
sition.
3 WPT Opens the [WAYPOINTS LIST] window.
4 GOTO Sets, releases destination.
5 DISP • Cycles through displays (basic screen: plotter, compass).
• Returns to the basic screen with menu or window open.
6 TM/RM Alternately selects true motion (TM) and relative motion (RM) dis-
plays.
TM: The own ship mark moves along with own ship position.
RM: The chart moves along with own ship position. The relative po-
sition for own ship mark on the screen is fixed.
7 MODE Changes the orientation mode.
8 ZOOM IN, ZOOM OUT Zooms the chart display range in or out.
9 ENTER knob • Rotate: Changes numeric data, selects menu items.
• Push: Confirms alphanumeric data entry or an operation.
10 CANCEL • Silences the audio alarm.
• Erases marks and waypoints.
• Clears alphanumeric data.
11 MENU • Opens/closes the main menu.
• With the menu open, goes back one layer in selected menu.
• Closes the window.
12 Numeric keys 0 to 9 • Enters numeric data.
• 1 to 8: Enters corresponding mark labeled on the key.
• Selects menu items.
• 0: Measures range and bearing between two points.
• 9: Enters the same mark as the last entered one then connects
them. This function is not available when no mark is entered
since power-on.
13 MARK/NUM Selects mark input format, mark symbol or numeric.
14 PLOT INTVL Starts, stops plotting of own ship track.
15 MARK COLOR Opens the [CHANGE MARK COLOR] window.
16 TRACK COLOR Opens the [CHANGE TRACK COLOR] window.
17
S
,
T
,
W
,
X
(CursorPad)
• Moves the cursor.
• Selects menu items.
18 CENTER • Cursor shown: Moves cursor to the screen center.
• Cursor not shown: Moves own ship position to the screen center
or the position one-third from the bottom of the screen depending
on the orientation mode.
• Confirms alphanumeric data entry or an operation on the menu.
19 CURSOR ON/OFF • Turns on/off the cursor.
• Sw to - and vice versa.
• Switches N to S, E to W and vice versa.
• Long press: Switches control between plotter split screen dis-
plays.
20 CURSOR SEL Selects cursor configuration among circle, parallel or diamond.
21 Trackball Moves the cursor.
22 UNDO Undoes previous mark/line input, edit or deletion operation.
23 F1, F2, F3, F4, F5 Activates assigned program.