Furuno FM-4800, Руководство оператора

Страница: 104 / 135

FM-4800 Operator’s Manual INSTALLATION
95
Step 3 Connect the red wire on the radio wiring harness to the positive (+) wire
from the speaker.
Step 4 Connect the black wire on the radio wiring harness to the negative (-) wire
from the speaker.
Step 5 Cover the connections with a waterproof tape or heat-shrinking tubing.
15.4.7
NMEA2000 Connector (CAN bus connector)
CAN bus is a communication protocol that shares multiple data and signals through
a single backbone cable. You can simply connect any CAN bus devices onto the
backbone cable to expand your network onboard. With CAN bus, Ids are assigned to
all the devices in the network, and the status of each sensor in the network can be
detected. All the CAN bus devices can be incorporated into the NMEA2000 network.
For detailed information about CAN bus wiring, see “Furuno CAN bus Network
Design Guide” (Type : TIE-00170) on Tech-Net), or contact your dealer.
15.4.8
Extension Cable (Optional)
Step 1
Drill a round or square hole on the ship panel.
The diameter of the hole ranges from 23.5 mm to 25 mm.
Step 2
Thread the extended cable through the hole.
Step 3
Place the seal, cable holder, and waterproof cover sequentially around the
extended cable.
Step 4
Fasten the nut.